||Non Woven Fabric
particulate filter mask,
face mask with carbon filter
CE Standard FFP2V Save Mask , Mold Filter Mask , Filtering Face-Piece Respirator
1 . Descriptions :
- 【High filtration】- High Technology Filters Almost 98% Of Airborne Particles Dust, Germs, Seasonal Allergies, Smoke, Car Exhausted Gas, PM 2.5 Pollution Ash.
- 【Designed for comfortable on-the-job protection】- Disposable Mask Is Lightweight, Humidity-resistant, Latex-free, Adjustable Metal Nose Strip And Comfortable Elastic Headband.
- 【Available 24/7】- Our Mask Can Be Used All Year In Any Weather Which Keeps You Safe From Fog, Smog, Dust, Germs, Bacteria, Viruses, Air Pollution, Allergens, And Humidity Thus Keeping You Healthy And Safe From Many Diseases.
- 【Size】- One Size Fits Most; Universal Contoured Design Provides A Snug Fit To Most Facial Profiles.
- 【Don't Worry】- If You Have Any Questions Or Queries, Please Do Not Hesitate To Contact Us. We Will Offer You A Satisfactory Solution.
FFP2V Dust Mask has two head-straps provides comfortable & secure seal.Nose clip individually adjustable nose clip for excellent fit.Protect against solid and liquid aerosols.The mask is light and comfortable. The internal nosepiece is made of velvet/sponge double-layer. There are no exposed metal components; the external nosepiece used to adjust the mask on the face is metal coated. Structure and materials are long lasting and avoid the collapse in humid environments.
2 . Certification
This product has been tested according to the following European Standard:
|CE Standard for Disposable Respirators
|EN: 149:2001 + A1:2009
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.EU type examination certificate (module B) issued by BSI , notified body n°0086.
- The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.
3 . Expiry date and packing
If maintained as per storage instructions, product can be used up to 5 years from date of manufactory.5pcs/box,60pcs/ctn.Each mask under invididual polybag.
4 . Advantages
- Polypropylene (P.P.) outer layer provides smooth lining and avoids loose fibres.
- Embossed fringe seal avoids fluffy open layer around the edges. Latex-Free synthetic rubber headstrap.
- Contour design ensures the compatibility of glasses/goggles and reduces fogging.
- Soft nose foam and adjustable nosepiece ensure custom shape and increase the worker comfort and acceptance.
- Light wear and comfortable. Contour fit.Easy breathing/Speaking. Clear vision. Free maintenance (disposable item).
- Better breathing provided by the exhalation valve.
- The ISO 9001 / ISO 14001 certified production guarantees the reliability / regularity of the production and the control of the environmental impact.
5 . Directions for use
- The mask is for single use only.
- The mask should not be removed from its packaging until its required for use.
- Use the respirator in accordance with applicable health and safety regulations.
- Fit the respirator and check leak-tightness before entering the contaminated area.
- Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.
Q: Can you provide free samples?
A: All samples are provided freely, it will takes3-5 days to prepare the samples.
Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.
Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.
7 . More pictures